A legjobb SQL példák

Az SQL a strukturált lekérdezési nyelv rövidítése. Mindenféle relációs adatbázisban használják.

Alapszintű SQL szintaxis példa

Ez az útmutató az SQL utasítások szintaxisának alapvető, magas szintű leírását tartalmazza.

Az SQL egy nemzetközi szabvány (ISO), de sok különbséget talál a megvalósítások között. Ez az útmutató a MySQL-t használja példaként. Ha a sok más relációs adatbázis-kezelő (DBMS) egyikét használja, akkor szükség esetén ellenőriznie kell a DBMS kézikönyvét.

Amire kitérünk

  • Use (beállítja, hogy az utasítás milyen adatbázist fog használni)
  • Select és From záradékok
  • Hol záradék (és / vagy IN, között, LIKE)
  • Rendezés (ASC, DESC)
  • Csoportosítás és birtoklás

Hogyan kell ezt használni

Ez az SQL utasítások táblázatait tartalmazó adatbázis kiválasztására szolgál:

use fcc_sql_guides_database; -- select the guide sample database 

Select és From záradékok

A Kiválasztás részt általában annak meghatározására használják, hogy az adatok mely oszlopait kívánják megjeleníteni az eredményekben. Vannak olyan lehetőségek is, amelyekkel olyan adatokat jeleníthet meg, amelyek nem táblázatos oszlopok.

Ez a példa két, a „hallgató” táblázatból kiválasztott oszlopot és két számított oszlopot mutat. A kiszámított oszlopok közül az első értelmetlen szám, a másik pedig a rendszer dátuma.

 select studentID, FullName, 3+2 as five, now() as currentDate from student; 
image-1

szintaxis01.JPG767 × 241

Hol záradék (és / vagy IN, között és LIKE)

A WHERE záradék a visszaküldött sorok számának korlátozására szolgál.

Ebben az esetben mind az ötet használni fogják, egy kissé nevetséges Where záradék.

Hasonlítsa össze ezt az eredményt a fenti SQL utasítással, hogy kövesse ezt a logikát.

Sorok kerülnek bemutatásra, amelyek:

  • 1 és 5 közötti (beleértve) diákigazolványokat
  • vagy studentID = 8
  • vagy „Maxmimo” szerepel a nevében

A következő példa hasonló, de tovább pontosítja, hogy ha a hallgatók bármelyike ​​rendelkezik bizonyos SAT pontszámokkal (1000, 1400), akkor azokat nem mutatják be:

 select studentID, FullName, sat_score, recordUpdated from student where ( studentID between 1 and 5 or studentID = 8 or FullName like '%Maximo%' ) and sat_score NOT in (1000, 1400); 
image-1

Rendezés (ASC, DESC)

A Rendezés által lehetőséget adunk arra, hogy a kiválasztott eredményt a KIVÁLASZTÁS egy vagy több eleme alapján rendezzük. Itt található a fentiekkel megegyező lista, de a hallgatók teljes név szerint rendezték. Az alapértelmezett rendezési sorrend növekvő (ASC), de az ellenkező sorrendbe (csökkenő) történő rendezéshez a DESC-t használja, mint az alábbi példában:

 select studentID, FullName, sat_score from student where (studentID between 1 and 5 -- inclusive or studentID = 8 or FullName like '%Maximo%') and sat_score NOT in (1000, 1400) order by FullName DESC; 
image-1

Csoportosítás és birtoklás

A Group By lehetőséget ad a sorok és adatok összesítésére. A Having záradék olyan, mint a fenti Where záradék, csakhogy a csoportosított adatokra hat.

Ezek az adatok a kampány hozzájárulási adataiból származnak, amelyeket ezekben az útmutatókban használtunk.

Ez az SQL állítás megválaszolja a kérdést: „mely jelöltek kapták a legtöbb hozzájárulást (nem $ összeget, hanem számítanak (*)) 2016-ban, de csak azokat, akiknek több mint 80 hozzájárulása volt?”

Ha ezt az adatsort csökkenő (DESC) sorrendben rendezi, akkor a legtöbb hozzászólással rendelkező jelöltek kerülnek a lista elejére.

 select Candidate, Election_year, sum(Total_$), count(*) from combined_party_data where Election_year = 2016 group by Candidate, Election_year having count(*) > 80 order by count(*) DESC; 
image-1

Mint mindezen SQL dolgok esetében, SOKKAL TÖBBEN számolnak velük, mint ami ebben a bevezető útmutatóban található. Remélem, hogy ez legalább annyit ad a kezdéshez. Kérjük, olvassa el az adatbázis-kezelő kézikönyvét, és jó szórakozást próbáljon ki magának a különböző lehetőségekkel.

Gyakori SQL interjúk

Mi az a belső csatlakozás az SQL-ben?

Ez az alapértelmezett típusú csatlakozás, ha nincs megadva csatlakozás. Visszaadja az összes sort, amelyben legalább egy találat van mindkét táblában.

SELECT * FROM A x JOIN B y ON y.aId = x.Id 

Mi az a bal oldali csatlakozás az SQL-ben?

A bal oldali csatlakozás az összes sort a bal oldali táblázatból adja vissza, az egyező sorokat pedig a jobb oldali táblázatból. A bal oldali táblázat sorai akkor is visszatérnek, ha a jobb táblázatban nem volt egyezés. A bal oldali táblázat sorai, amelyek nem egyeznek a jobb táblázatban, nulla jobb tábla értékeire vonatkoznak.

SELECT * FROM A x LEFT JOIN B y ON y.aId = x.Id 

Mi az a jobb csatlakozás az SQL-ben?

A jobb oldali csatlakozás az összes sort a jobb oldali táblázatból adja vissza, az egyező sorokat pedig a bal oldali táblázatból. A bal oldali csatlakozással szemben ez visszaadja a jobb oldali táblázat összes sorát, még akkor is, ha a bal oldali táblázatban nincs egyezés. A jobb oldali táblázat azon sorai, amelyeknek nincs egyezése a bal oldali táblázatban, a bal nulloldali oszlopok értékeit tartalmazzák.

SELECT * FROM A x RIGHT JOIN B y ON y.aId = x.Id 

Mi az a teljes csatlakozás az SQL-ben?

A full join returns all rows for which there is a match in either of the tables. So if there are rows in the left table that do not have matches in the right table, those will be included. As well as if there are rows in the right table that do not have matches in the left table, those will be included.

SELECT Customers.CustomerName, Orders.OrderID FROM Customers FULL OUTER JOIN Orders ON Customers.CustomerID=Orders.CustomerID ORDER BY Customers.CustomerName 

What is the result of the following command?

 DROP VIEW view_name 

Here it’ll be an error because we can’t perform a DML operation on a view.

Can we perform a rollback after using ALTER command?

No, because ALTER is a DDL command and Oracle server performs an automatic COMMIT when the DDL statements are executed.

Which is the only constraint that enforces rules at column level?

NOT NULL is the only constraint that works at the column level.

What are the pseudocolumns in SQL? Give some examples?

A pseudocolumn is a function which returns a system generated value. The reason it is known as so because a pseudocolumn is an Oracle assigned value used in the same context as an Oracle database column but not stored on disk.

 ROWNUM, ROWID, USER, CURRVAL, NEXTVAL etc. 

Create a user my723acct with password kmd26pt. Use the user data and temporary data tablespaces provided by PO8 and provide to this user 10M of storage space in user data and 5M of storage space in temporary_data.

 CREATE USER my723acct IDENTIFIED BY kmd26pt DEFAULT TABLESPACE user_data TEMPORARY TABLESPACE temporary_data QUOTA 10M on user_data QUOTA 5M on temporary_data 

Create the role role tables and_views.

 CREATE ROLE role_tables_and_views 

Grant to the role of the previous question the privileges to connect to the database and the privileges to create tables and views.

The privilege to connect to the database is CREATE SESSION The privilege to create table is CREATE TABLE The privilege to create view is CREATE VIEW

 GRANT Create session, create table, create view TO role_tables_and_views 

Grant the previous role in the question to the users anny and rita

 GRANT role_tables_and_views TO anny, rita 

Create a user my723acct with password kmd26pt. Use the user data and temporary data tablespaces provided by PO8 and provide to this user 10M of storage space in user data and 5M of storage space in temporary_data.

 CREATE USER my723acct IDENTIFIED BY kmd26pt DEFAULT TABLESPACE user_data TEMPORARY TABLESPACE temporary_data QUOTA 10M on user_data QUOTA 5M on temporary_data 

Create the role role tables and_views.

 CREATE ROLE role_tables_and_views 

Grant to the role of the previous question the privileges to connect to the database and the privileges to create tables and views.

The privilege to connect to the database is CREATE SESSION The privilege to create table is CREATE TABLE The privilege to create view is CREATE VIEW.

 GRANT Create session, create table, create view TO role_tables_and_views 

Grant the previous role in the question to the users anny and rita

 GRANT role_tables_and_views TO anny, rita 

Write a command to change the password of the user rita from abcd to dfgh

 ALTER USER rita IDENTIFIED BY dfgh 

The users rita and anny do not have SELECT privileges on the table INVENTORY that was created by SCOTT. Write a command to allow SCOTT to grant the users SELECT priviliges on these tables.

 GRANT select ON inventory TO rita, anny 

User rita has been transferred and no longer needs the privilege that was granted to her through the role role tables and_views. Write a command to remove her from her previous given priviliges except that she still could connect to the database.

 REVOKE select ON scott.inventory FROM rita REVOKE create table, create view FROM rita 

The user rita who was transferred is now moving to another company. Since the objects that she created is of no longer use, write a commmand to remove this user and all her objects.

Here CASCADE option is necessary to remove all the objects of the user in the database.

 DROP USER rita CASCADE ### User rita has been transferred and no longer needs the privilege that was granted to her through the role role_tables_and_views. Write a command to remove her from her previous given priviliges except that she still could connect to the database. ``` sql REVOKE select ON scott.inventory FROM rita REVOKE create table, create view FROM rita 

The user rita who was transferred is now moving to another company. Since the objects that she created is of no longer use, write a command to remove this user and all her objects.

Here CASCADE option is necessary to remove all the objects of the user in the database.

 DROP USER rita CASCADE 

Write SQL query to find the nth highest salary from table.

 SELECT TOP 1 Salary FROM ( SELECT DISTINCT TOP N Salary FROM Employee ORDER BY Salary DESC ) ORDER BY Salary ASC

SQL Create View Statement

What is a View?

A View is a database object that presents data existing in one or more tables. Views are used in a similar way to tables, but they don’t contain any data. They just “point” to the data that exists elsewhere (tables or views, for example).

Why do we like them?

  • Views are a way to limit the data presented. For example, the human resources department data filtered to only present non-sensitve information. Sensitive information in this case could be social security numbers, sex of employee, payrate, home address, etc.
  • Complex data across more than one table can be combined into a single “view.” This can make life easier for your business analysts and programmers.

Important Safety Tips

  • Views are managed by the system. When data in the related tables are changed, added, or updated, the View is updated by the system. We want to use these only when needed to manage use of system resources.
  • In MySQL, changes to the table design (that is, new or dropped columns) made AFTER a view is created are not updated in the view itself. The view would have to be updated or recreated.
  • Views are one of the four standard database object types. The others are tables, stored procedures, and functions.
  • Views can usually be treated as you would a table, but updates are limited or not available when the view contains more than one table.
  • There are many other details about views that are beyond the scope of this introductory guide. Spend time with your database managers manual and have fun with this powerful SQL object.

Syntax of the Create View Statement (MySQL)

CREATE [OR REPLACE] [ALGORITHM = UNDEFINED ] [DEFINER =  user ] [SQL SECURITY  DEFINER ] VIEW view_name [(column_list)] AS select_statement [WITH [CASCADED | LOCAL] CHECK OPTION] 

This guide will cover this part of of the statement…

CREATE VIEW view_name [(column_list)] AS select_statement 

Sample View creation from the student tables

Notes:

  • The name of the view has a “v” at the end. It’s recommended that the view name indicate that it’s a view in some way to make life easier for programmers and database administrators. Your IT shop should have its own rules on naming objects.
  • The columns in the view are limited by the SELECT and the rows of data by the WHERE clause.
  • the ”`” character around the view names is required because of the ”-” in the names. MySQL reports an error without them.
create view `programming-students-v` as select FullName, programOfStudy from student where programOfStudy = 'Programming'; select * from `programming-students-v`; 

Sample of using a View to combine data from more than one table

A Student demographics table was added to the database to demonstrate this usage. This view will combine these tables.

Notes:

  • To “join” tables, the tables must have fields in common (usually primary keys) that uniquely identity each row. In this case it’s the student ID. (More on this in the SQL Joins guide.)
  • Notice the “alias” given to each table (“s” for student and “sc” for student contact). This is a tool to shorten the table names and make it easier to identify which table is being used. It’s easier than typing long table names repeatedly. In this example, it was required because studentID is the same column name in both tables, and the system would present an “ambiguous column name error” without specifying which table to use.

Guide to the SQL Between Operator

The BETWEEN Operator is useful because of the SQL Query Optimizer. Although BETWEEN is functionally the same as: x <= element <= y, the SQL Query Optimizer will recognize this command faster, and has optimized code for running it.

This operator is used in a WHERE clause or in a GROUP BY HAVING clause.

Rows are selected that have a value greater than the minimum value and less than the maximum value.

It’s important to keep in mind that the values entered in the command are excluded from the result. We get just what is between them.

Here is the syntax for using the function in a WHERE Clause:

select field1, testField from table1 where testField between min and max 

Here is an example using the student table and the WHERE clause:

-- no WHERE clause select studentID, FullName, studentID from student; -- WHERE clause with between select studentID, FullName, studentID from student where studentID between 2 and 7; 
image-1

Here is an example using the campaign funds table and the having clause. This will return rows where the sum of the donations for a candidate are between $3 Million and $18 Million based on the HAVING clause in the GROUP BY part of the statement. More on aggregation in that guide.

select Candidate, Office_Sought, Election_Year, format(sum(Total_$),2) from combined_party_data where Election_Year = 2016 group by Candidate, Office_Sought, Election_Year having sum(Total_$) between 3000000 and 18000000 order by sum(Total_$) desc; 
image-1

SQL Create Table Statement Example

A table is a group of data stored in a database.

To create a table in a database you use the CREATE TABLE statement. You give a name to the table and a list of columns with its datatypes.

CREATE TABLE TABLENAME(Attribute1 Datatype, Attribute2 Datatype,........); 

Here’s an example creating a table named Person:

CREATE TABLE Person( Id int not null, Name varchar not null, DateOfBirth date not null, Gender bit not null, PRIMARY KEY( Id ) ); 

In the example above, each Person has a Name, a Date of Birth and a Gender. The Id column is the key that identifies one person in the table. You use the keyword PRIMARY KEY to configure one or more columns as a primary key.

A column can be not null or null indicating whether it is mandatory or not.

A guide to the SQL Insert Query

Insert queries are a way to insert data into a table. Let’s say we have created a table using

CREATE TABLE example_table ( name varchar(255), age int)

example_table

Name|Age --- | --- 

Now to add some data to this table , we’ll use  INSERT  in the following way:

INSERT INTO example_table (column1,column2) VALUES ("Andrew",23)

example_table

Name|Age --- | --- Andrew|23

Even the following will work, but it’s always a good practice to specify which data is going into which column.

INSERT INTO table_name VALUES ("John", 28)

example_table

Name|Age --- | --- Andrew|23 John|28

A guide to the SQL AND operator

AND is used in a WHERE clause or a GROUP BY HAVING clause to limit the rows returned from the executed statement. Use AND when it’s required to have more than one condition met.

We’ll use the student table to present examples.

Here’s the student table without a WHERE clause:

select * from student; 
image-1

and_operator01.JPG?raw=true760×247

Now the WHERE clause is added to display only programming students:

select * from student where programOfStudy = 'Programming'; 
image-1

and_operator02.JPG?raw=true790×179

Now the WHERE clause is updated with AND to show results for programming students that also have a SAT score greater than 800:

select * from student where programOfStudy = 'Programming' and sat_score > 800; 
image-1

and_operator03.JPG?raw=true790×179

This is a more complex example from the campaign contributions table. This example has a GROUP BY clause with HAVING clause using an AND to restrict the returned records to candidates from 2016 with contributions between $3 Million and $18 Million in total.

select Candidate, Office_Sought, Election_Year, FORMAT(sum(Total_$),2) from combined_party_data where Office_Sought = 'PRESIDENT / VICE PRESIDENT' group by Candidate, Office_Sought, Election_Year having Election_Year = 2016 and sum(Total_$) between 3000000 and 18000000 order by sum(Total_$) desc; 
image-1

How to use the SQL Order By Keyword

Order By (ASC, DESC)

ORDER BY gives us a way to SORT the result set by one or more of the items in the SELECT section. Here is an SQL sorting the students by FullName in descending order. The default sort order is ascending (ASC) but to sort in the opposite order (descending) you use DESC.

SELECT studentID, FullName, sat_score FROM student ORDER BY FullName DESC; 
+-----------+------------------------+-----------+ | studentID | FullName | sat_score | +-----------+------------------------+-----------+ | 2 | Teri Gutierrez | 800 | | 3 | Spencer Pautier | 1000 | | 6 | Sophie Freeman | 1200 | | 9 | Raymond F. Boyce | 2400 | | 1 | Monique Davis | 400 | | 4 | Louis Ramsey | 1200 | | 7 | Edgar Frank "Ted" Codd | 2400 | | 8 | Donald D. Chamberlin | 2400 | | 5 | Alvin Greene | 1200 | +-----------+------------------------+-----------+ 9 rows in set (0.00 sec) 

Here is the UN-ORDERED, current, full student list to compare to the above.

SELECT studentID, FullName, sat_score, rcd_updated FROM student; 
+-----------+------------------------+-----------+---------------------+ | studentID | FullName | sat_score | rcd_updated | +-----------+------------------------+-----------+---------------------+ | 1 | Monique Davis | 400 | 2017-08-16 15:34:50 | | 2 | Teri Gutierrez | 800 | 2017-08-16 15:34:50 | | 3 | Spencer Pautier | 1000 | 2017-08-16 15:34:50 | | 4 | Louis Ramsey | 1200 | 2017-08-16 15:34:50 | | 5 | Alvin Greene | 1200 | 2017-08-16 15:34:50 | | 6 | Sophie Freeman | 1200 | 2017-08-16 15:34:50 | | 7 | Edgar Frank "Ted" Codd | 2400 | 2017-08-16 15:35:33 | | 8 | Donald D. Chamberlin | 2400 | 2017-08-16 15:35:33 | | 9 | Raymond F. Boyce | 2400 | 2017-08-16 15:35:33 | +-----------+------------------------+-----------+---------------------+ 9 rows in set (0.00 sec) 

As with all of these SQL things there is MUCH MORE to them than what’s in this introductory guide.

I hope this at least gives you enough to get started.

Kérjük, olvassa el az adatbázis-kezelő kézikönyvét, és jó szórakozást próbáljon ki magának a különböző lehetőségekkel.